Assembly process No.
S-1
8. Installation of covers
(1) Reassemble the B-pillar cover. (Reassembly of cover removed in step 5)
•
Install B-pillar covers (U) and (V) with bolt (Y), collar (W), and washer (X).
•
Install handles (AA) (1 pieces each on the right and left sides) with bolts (AB).
a At this time, set collar (Z) on the handle seat as it was.
(2) Reassemble the C-pillar cover. (Reassembly of cover removed in step 6)
•
Install C-pillar cover (AC) with clips (AD).
•
Install coat hook (AE) with screw (AF).
U
V
P
Fig. 8 B-pillar cover
Precautions
Take care not to lose the removed parts since they will
be installed again after the cab and floor are connected.
Installation of operator's cab (11/16)
Y X W
AB
AA
Section of P-handle
Necessary tools
Other remarks
60
AE
AF
AC
Z
AD
Fig. 9 C-pillar cover
Name
Q'ty
Necessary equipment
Name
Q'ty