Table of Contents
Advertisement
Assembly process No.
M-1
5-2.Adjusting
(1) Adjusting height of damper rubber
Increase or decrease of the shims under the damper rubber to adjust the height of the
damper rubber properly.
(2) Adjusting latch and striker
a) Tighten the mounting bolt of the striker temporarily and open and close the door 2 – 3
times to align the latch and striker with each other.
b) Check the engaging condition of the latch and striker.
c) Tighten the mounting bolt of the striker permanently.
d) Open and close the door and check that it is locked and unlocked smoothly. If the door is
not locked and unlocked smoothly (If the knoc is heavy), perform the adjustment proce-
dure from the first.
a Operating effort of knob: 49 ± 19.6 N {5 ± 2 kg}
(3) Apply grease (G2-Ll) to the latch.
Precautions
If the latch is not grease, the knob becomes heavy.
Accordingly, apply grease sufficiently.
Testing and adjusting operator's cab (5/10)
Fig. 6
Necessary tools
Other remarks
78
Name
Q'ty
Necessary equipment
Name
Q'ty
Advertisement
Table of Contents
