Table of Contents
Advertisement
Assembly process No.
M-1
(2) Adjusting installed height of stopper rubber ( 2 places, upper and lower) Fig. 9, Fig. 10
a) Loosen the locknut of the stopper rubber.
b) If there is any play, project the stopper rubber until the play is eliminated.
If the door is not locked easily or the unlock lever is heavy, return the stopper rubber in the
range that the door does not have any play.
c) Tighten the locknut.
Testing and adjusting operator's cab (9/10)
Fig. 10
Fig. 11
82
Advertisement
Table of Contents
