Assembly process No.
M-1
1. Adjusting door duct
•
Loosen the duct mounting bolts and fix the duct to the rear end temporarily.
•
Close the door.
a Do not leave the door half-open but close it securely.
•
Loosen the mounting bolts and adjust the distance between the seal fitting surface of the duct
and the seal contacting surface of the door to 14 mm.
a Adjust the clearance evenly at the top and bottom.
Duct
Precautions
Testing and adjusting operator's cab (1/10)
Duct
Fig. 1 Door duct
Necessary tools
Other remarks
74
Name
Q'ty
Necessary equipment
Name
Q'ty