Installing The Emulator Debugger - Renesas R0E3308B0EPB00 User Manual

R0E3308B0EPB00 User's Manual

2.2 Installing the Emulator Debugger

If the OS used in your host machine is Windows® XP or Windows® 2000, this installation must be executed by a user with
administrator rights. Be aware that users without administrator rights cannot complete the installation.
Install the emulator debugger (M32C PC7501 Emulator Debugger or M3T-PD308F) following the procedure described below.
(1) Downloading the emulator debugger (as occasion demands)
Download the emulator debugger from the URL below (free of charge).
http://www.renesas.com/download
(2) Launching the installer
Start the emulator debugger install program.
(3) Entering the user information
In the "user information" dialog box, enter the user information (contractor, section, contact address, and host machine).
The supplied information will be turned into a format by which technical support will be provided by e-mail.
(4) Selecting components
In the "component selection" dialog box, select the components you want to install. In this dialog box you can change the
directory in which to install.
(5) Completing the installation
A dialog box will be displayed indicating that setup has been completed. It means that the installation you made is
completed.
R20UT0210EJ0200 Rev.2.00
Sep 16, 2010
2. Setup
Page 21 of 98