Bridge Mode - Innosonix MAXX Series Manual

6.6.2. BRIDGE MODE

NR DESCRIPTION
Indicates summarized state of selected channels.
Enable bridge mode for selected channels.
Disable bridge mode for selected channels.
States for all selected channels.
Only adjacent channel pairs can be set to bridge mode, channel 1/2 or 3/4

...

Enabling the BRIDGE MODE for a channel pair will clear all settings of the
EVEN channel.
2023-01-05 | Rev. 3.17.0
MAXX/HP²
Chapter 6. WEBSITE
6.6. CHANNEL SETTINGS
6.6. CHANNEL SETTINGS | 36/86