Dante Ip Settings; Control Ip Settings; Hostname; Network Services - Innosonix MAXX Series Manual

seconds till the Dante Device is back online.

DANTE IP SETTINGS

To control and change IP Settings of DANTE, use the DEVICE page
use in Dante Device

CONTROL IP SETTINGS

There are several ways to change the IP of an Amplifier. See
on Display Menu, DEVICE
IP SETTINGS).
There are three different IP Types available:
Table 3. IP TYPES
TYPE DESCRIPTION
static set IP, SUBNET and GATEWAY manually
dhcp system tries to get a DHCP release, there is also an auto ip fallback, if no lease available
auto-ip force zeroconf IP, device will get an address with a 169.254/16 prefix (that is, 169.254.xxx.xxx)

HOSTNAME

With mDNS the device is also available with its hostname. With hostname AMP1 the
local name is AMP1.local. The Name can be used to call every network service, like a
webbrowser, http://AMP1.local.
There are several ways to change the Hostname of an Amplifier. See
on Website or use the external software IDFM.

NETWORK SERVICES

• Full remote control via the website hosted on the device (see WEBSITE)
• REST-API, JSON based web service for integration in media control systems (see
RESTful API)
• mDNS name resolution and servicediscovery
• syslog integration to send notifications to external syslog server
2023-01-05 | Rev. 3.17.0
View.
to change on Website or use the external software IDFM (see
Chapter 2. TECHNICAL SPECIFICATION
2.4. CONNECTIONS & CABLE
DANTE
DISPLAY MENU
DEVICE
(INFO HERE)
(INFO
2.4. CONNECTIONS & CABLE | 13/86
MAXX/HP²
SETTINGS, or
to change
to change
HERE)