ProMinent gamma G/4b Operating Instructions Manual page 25

Version 2.0
Unpacking
ATTENTION:
Check that the details on the identification plate match the order
details!
If they do not, immediately notify the ProMinent subsidiary or representative
responsible for you (Please see reverse of these operating instructions for
addresses).
G/4b 0215 NP1
ProMinent Dosiertechnik
im Schuhmachergewann
D-69123 Heidelberg
Tel. 06221/8420
Made in Germany
A 93 00...
Each gamma/4 metering pump is provided with an identification plate.
This can be found on the base of the pump.
In addition to the technical basic data the IDENTITY CODE and the serial
no. are specified. Both numbers are to be stated during any enquiry or
when ordering spare parts as they permit a clear identification of the pump
type and material variant.
Please make a note of the following details of the pump delivered so that
these are always available when required:
0
0 0 A 0
TYPE G/4B0215NP1000A00000
SER.NR./PN. is
POWER SUPPLY 230 V
AMP.PULS 23/25 W
DOSING RATE 14,8 l/h
G/4b-008-D
0 0 0 0
/ 794067
50/60Hz
0,9 A
1,5 bar
G/4b-007-GB
Page 23 of 88 pages