Table of Contents
Advertisement
Version 2.0
Operation (Option Version)
P
• Confirm with
Display "E" for external (remote) control in "Contact" operation.
Stop
Contact
Selection of the display functions"f", "N÷ " oder "N":
So that the factor "N÷ " of the step-up ratio, e.g. 5.00 is always displayed
or the metering strokes executed are counted by being added on (stroke
counter "N") the following settings should be carried out.
Display
Stop
Contact
P
• Press the
key approx. 2 seconds
Stop
Manual
Contact
• Press the
key for display function.
Stop
P
• Confirm with
Stop
"f" specifies the stroking rate in 0 to 120 strokes per min.
f
N
f
Page 69 of 88 pages
Advertisement
Table of Contents
