Set-up
8
Set-up
8.1 Basic principles of control adjustment
Confirming an entry
Quitting a menu option without confirming
it
Jumping back to a continuous display
Changing adjustable values
Confirming adjustable values
8.2 Checking adjustable values / error messages
Continuous displays
44
Please read the overviews in the appendix, "Control ele‐
–
ments and key functions" and "Operating/setting dia‐
gram" for supplementary information.
If no key is pressed for a 1 minute duration, the pump
–
returns to a continuous display.
= Setting option
= Adjustable
Continuous
display
[P/OK] key.
Briefly press the
The display simultaneously changes to the next selection, to the next
menu option or into a continuous display.
[ESC] .
Press
You will jump back to the previous menu option or menu.
Press and hold the
[ESC] key for 2 seconds.
[UP] or [DOWN] .
Press the arrow keys
In this way the digit between the triangles is increased or reduced.
Select the digit position in a number using the key
[P/OK] key.
Press the
The display simultaneously changes to the next selection, to the next
menu option or into a continuous display.
Before you adjust the pump, you can check the actual settings of the
adjustable variables:
[i/>] ("i" for "Info"), if the pump is displaying a contin‐
1.
Press the key
uous display (An "i" is visible at the top left).
ð Each press of the
or a plain text error message.
2.
The continuous display values can be changed using the
[arrow keys] .
Settings
Auxiliary freq.
Auxiliary freq.
Calibration
Dosing
Relay
Diaphragm break
2 s
[i/>] .
[i/>] key displays another continuous display
070
/min
2 s