Table of Contents
Advertisement
Customer service
Pumps for radioactive media
Page 82 of 88 pages
Repair
15
Repair
WARNING:
Metering pumps may only be repaired by trained and
authorised persons!
Inform your customer service responsible!
Or contact the ProMinent subsidiary or representative
responsible for you.
(Addresses can be found on the back page of these operating
instructions)!
WARNING:
Pumps for radioactive media may not be sent.
PLEASE NOTE:
Only send the metering pump back for repair once it has been
cleaned and the liquid end has been rinsed!
PLEASE NOTE:
The legal regulations for occupational safety - e.g. the regulation
governing places of work, hazardous substances, the prevention
of accidents and environmental protection regulations (law
governing waste or water resources) oblige all industrial
entrepreneurs to protect their employees or people and the
environment against damaging effects from handling hazardous
substances!
An inspection or repair of pumps and their parts therefore only
takes place if a correctly and completely filled in certificate
confirming the quality as being recognised as safe can be
submitted by authorised and qualified specialists of the pump
operator!
If in spite of emptying and cleaning the pump carefully, safety
measures are necessary, the necessary information must be
listed in the certificate confirming the pump is recognised as being
safe!
The certificate confirming the pump is recognised as being safe
is a part of the inspection/repair contract.
There is a standard form at the end of these operating
instructions for this purpose!
We reserve the right not to accept the contract due to other
reasons. Pumps which were operated with materials with a
radioactive load are not accepted as a general rule!
Version 2.0
Advertisement
Table of Contents
