Page 24 of 88 pages
Installation
IDENTITY CODE
__________________________________________________
Serial number
__________________________________________________
Place of installation
__________________________________________________
__________________________________________________
Metering application
__________________________________________________
Commissioning
__________________________________________________
10
Installation
10.1
Installing the pump: mechanical part
10.1.1 Pump installation with console or tank
• Assemble metering pump onto a container or a console with screws
and washers (dia. 5 mm).
PLEASE NOTE:
The pump must be fastened in such a way that no vibrations can
arise!
The valves of the liquid end must always be kept upright in order
to guarantee that they function smoothly!
10.1.2 Connection of suction/discharge line to the pump
PLEASE NOTE:
Suction and discharge lines must always be laid in such a way that
a stress-free connection at the liquid end is ensured.
Lines must be fastened so that no vibrations can arise!
PLEASE NOTE:
When metering extremely aggressive or dangerous media we
recommend a bleeding with backfeed to the tank! Additionally, an
isolating valve should be provided at the discharge and suction
side!
Version 2.0