Connect The Power Cord; Voltage And Resistance Measurement; Connect The Cell; Configure The Channel And Function - Fluke BT5300 Series User Manual

BT5300 Series
User Manual

Connect the Power Cord

3. Connect the power cord and power on the Product according to th description in the section
Connect to Power and

Voltage and Resistance Measurement

Connect the Cell

4. Connect the test cables to a Multiplexer Card in the Product or Switch Mainframe, and to the cell
under test according to the description in the section
Measurement.

Configure the Channel and Function

5. Configure the channel as following according to the description in the section
Channels, as well as the wiring method above:
Module Selection: Internal or External
Slot: the slot to be used
Channel: the channel to be used
Function: ACR + DCV
26
Ground.
3
4
5
SLOT 1
Wiring for Voltage and Internal Resistance
-
+
Configuring