Table of Contents
Advertisement
Some commands require parameter data to specify values for one or more parameters. The
command header is separated from the parameter data by a space (20 hex or 32 decimal). Multiple
parameters are separated by a comma (,).
The Instrument's input buffer capacity is 512 bytes. The remote interface will not accept data beyond
512 bytes.
Table 16.
Data type
(parameter and
response)
NRf
NR1
NR2
NR3
Boolean
Character
Channel_list
Data type abbreviation (parameter and response)
Numeric data, number format may be any of NR1, NR2 and NR3
Numeric data, integer data (e.g.: 4, +4, -4)
Numeric data, fixed-point data (e.g.: 4.5, +4.5, -4.5)
Numeric data, floating-point exponential representation data (e.g.: 4.0E+1,
+4.0E+1, -4.0E+1)
Boolean data (e.g.: OFF, ON, 0, 1)
Character parameters supported (e.g., FLUKE_DEFINED, FLUKE_DEFINED',
FLUKE_DEFINED")
Character parameters can be be set with/without single quote/double quote. The
returned parameter is without single quote/double quote.
Channel numbers of the Multiplex Cards, 3-digit format, the 1st digit represents
slot ID (1 to 8), the last 2 digits represents channel ID (01 to 32) (e.g., (@101),
(@101:104)).
Description
Battery Tester
Remote Control
71
Advertisement
Table of Contents
