Trigger Commands - Fluke BT5300 Series User Manual

BT5300 Series
User Manual

Trigger Commands

Measurement
flow
100
Table 22.
Continuous Measurement Command-Specific Settings
INITiate:CONTinuous ON
Free-Run state. Measurement continues
automatically.
Triggered by TRIG Key or *TRG command.
After measurement, enters the trigger wait
state.
Trigger mode table
INITiate:CONTinuous OFF
Start measurement by INITiate (or
READ?) command.
INITiate (or READ?) command to wait for
trigger. Triggered by TRIG key (INITiate
or READ?) or *TRG (INITiate). After
measurement, enter the idle State.