Remote Control; Connect The Computer - Fluke BT5300 Series User Manual

Remote Control

Connect the Computer

The product has a RS-232 interface and a Ethernet interface, and can connect to a computer through
any interface.
For the procedure to connect the Product to the Switch Mainframe, see the section
Between the Product and the Switch
To connect through the RS-232 interface:
As shown in method A of
(e Figure 3) on the rear panel of the Product to a USB port on the computer, or connect a standard
RS-232 communication cable to a standard RS-232 port on the computer.
To order a RS-232 to USB adapter cable, see
To connect through the Ethernet interface:
As shown in method B of
on the rear panel of the Product to a Ethernet port on the computer.
To order a Ethernet cable, see
B
A
Mainframe.
Figure 44, connect a RS-232 to USB adapter cable from the RS-232 port
Table 6
Figure 44, connect a Ethernet cable from the Ethernet port (f in
Table 7 and the section
A
Figure 44. Connecting to the computer
and the section How to Contact
How to Contact Fluke.
B
Battery Tester
Remote Control
Connection
Fluke.
Figure 3)
69