Fluke BT5300 Series User Manual page 89

Command Header
[ ]: Omissible
Remote Interface Commands
SYSTem:LOCal
Factory Reset Commands
SYSTem:RESet
Line Power Frequency Commands
SYSTem:LFReqency
SYSTem:LFReqency?
Measurement Configuration Commands
ADJust?
ADJust:CLEar
AUTorange
AUTorange?
INPut:IMPedance:HIGH
INPut:IMPedance:HIGH?
[:SENSe]:FUNCtion
[:SENSe]:FUNCtion?
RESistance:RANGe
RESistance:RANGe?
RESistance:CURRent:MA
X
RESistance:CURRent:MA
X?
VOLTage:RANGe
Data Format
[ ]: Omissible
( ): Response data
{ }: Customized parameter definition*
|: Or
{F50Hz | F60Hz}
({F50HZ | F60HZ})
<NR1 (0 or 1)>
<Boolean>
(<Boolean>)
<Boolean>
(<Boolean>)
{RVOLtage | EPCCheck | PEVoltage |
NEVoltage | RV | RESistance |
VOLTage }
({RV | EPCCHECK | PEVOLTAGE |
NEVOLTAGE | RESISTANCE |
VOLTAGE })
<NRf (0 to 10)>
({AUTO | 3.0000E-03 | 3.0000E-02 |
3.0000E-01 | 3.0000E+00 |
1.0000E+01})
{C100 | C200 | C300}
({C100 | C200 | C300})
<NRf (-10 to 10)>
Battery Tester
Remote Control
Description
Cancel the communication
(remote) state.
Restore factory settings.
Set the power line frequency.
Query the power line frequency.
Execute zero adjustment and
return the result (success or fail).
Clear the zero adjustment value.
Enable or disable the resistance
measurement auto range.
Query the resistance
measurement auto range setting.
Enable or disable the input high
impedance (>10 GΩ).
Query the input high impedance
setting.
Set the measurement function.
Query the measurement function.
Set the resistance measurement
range.
Query the resistance
measurement range.
Set the maximum measurement
current.
Query the maximum
measurement current.
Set the voltage measurement
range.
77