Table of Contents
Advertisement
BT5300 Series
User Manual
Input and Channel Configuration
In addition to a set of inputs on the front panel, the Product can also accommodate up to 2 built-in
Multiplexer Cards and support up to 8 external Multiplexer Cards. Each Multiplexer Card provides
32 channels, so that the total count of channels reaches 320.
Front Inputs
See the section
Front Panel
Test leads and cables are not the standard accessories. Please purchase test cables and optional
leads (see
Table
the section
Appendix 2. Precautions for Making Custom Test Cables
yourself.
To connect test leads:
1. Confirm that the mains power switch of the Product is off.
2. Confirm that the test leads are not connected to any circuit.
3. Plug the connectors of the 4-wire test leads to the front panel input terminals of the Product, as
shown in
Figure
32
and
Appendix 1. AC Four-terminal Method
Figure 8.
7) according to the specific situation or make your own test cables. Please refer to
9.
for more information.
Front inputs
when making test leads by
Advertisement
Table of Contents
