SmartLi 1.0
User Manual
Figure 3-34 Fill the holes with sealing putty
(1) Paper protective film
Figure 3-35 Dustproof cover
(1) Top dustproof cover
Issue 08 (2022-11-15)
NO TE
1. In the scenarios where covers are removed for routing cables, after routing cables and
checking cable connections, use sealing putty to fill in the gap between the cables and
the cabinet.
2. After verifying the installation, reinstall all the covers.
3. Do not remove the dustproof cover before power-on to prevent dust inside the UPS.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Sealing putty
(2) Rear dustproof cover
3 Installation
(3) Front dustproof cover
57