Table of Contents
Advertisement
SmartLi 1.0
User Manual
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
General Requirements
The category 3 (C3) battery is intended for commercial and industrial application
in the second class environment. Installation restrictions or additional measures
may be needed to prevent interference.
●
Issue 08 (2022-11-15)
Batteries are damaged because the onsite equipment operating environment
or external power parameters do not meet the environment requirements for
normal operation, for example, the actual operating temperature of batteries
is too high or too low, or the power grid is unstable and experiences outages
frequently.
Batteries are damaged, fall, leak, or crack due to improper operations or
incorrect connection.
After being installed and connected to the system, the batteries are not
powered on in time due to your reasons, which causes damage to the
batteries due to overdischarge.
Batteries are damaged because they are not accepted in time due to your
reasons.
You set battery operating parameters incorrectly.
You use batteries of different types together, causing acceleration of capacity
attenuation. For example, you use our batteries together with batteries of
other vendors or with batteries of different rated capacity.
Batteries are frequently overdischarged due to your improper maintenance,
you expand the load capacity without notifying us, or have not fully charge
batteries for a long time.
You do not perform battery maintenance based on the operation guide, such
as failure to check battery terminals regularly.
Batteries are damaged because you do not store them in accordance with
storage requirements (for example, in an environment that is damp or prone
to rain).
Batteries are not charged as required during storage due to your reasons,
resulting in capacity loss or other irreversible damages to the batteries.
Batteries are damaged due to your or a third party's reasons, for example,
relocating or reinstalling the batteries without complying with the Company's
requirements.
You change the battery use scenarios without notifying the Company.
You connect extra loads to the batteries.
The battery storage period has exceeded the upper limit.
The battery warranty period has expired.
NO TICE
Use batteries within the specified temperature range. When the ambient
temperature of the batteries is lower than the allowed range, do not charge
the batteries to prevent internal short circuits caused during low-temperature
charging.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
7
Advertisement
Table of Contents
