Unpacking And Checking - Huawei SmartLi 1.0 User Manual

SmartLi 1.0
User Manual
Phillips
screwdriver
(M3/M4/M5/M6/
M8)
Table 3-1
tools required, see the corresponding component manuals. Prepare tools based on site
requirements.

3.1.3 Unpacking and Checking

Context
● To prevent the SmartLi from falling over, secure it to a pallet truck using ropes
● To prevent shocks or falls, move the SmartLi gently. After placing the SmartLi in
● To prevent dust from settling on the SmartLi, leave the original plastic coat on
● Battery modules are transported separately.
Procedure
Step 1 Use a pallet truck to transport the SmartLi to the installation position.
Step 2 Check the SmartLi packing.
Step 3 Hold the sliding plate steady. Cut and remove the binding tapes. Put down the
sliding plate gently.
Step 4 Remove packing materials.
Issue 08 (2022-11-15)
Insulated torque
wrench
(M6/M8/M12/
M16)
NO TE
lists only the common tools for installation and cable connection. For more dedicated
NO TICE
before moving it.
the installation position, unpack it and take care to prevent scratches. Keep the
SmartLi steady during unpacking.
until installation is required.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Tools and Meters
Heat shrink
tubing
3 Installation
Insulated
adjustable wrench
32