Huawei SmartLi 1.0 User Manual page 40

SmartLi 1.0
User Manual
Figure 3-2 Removing packing materials
Step 5 Remove the plastic bag and take out the fittings box.
Step 6 Check that the SmartLi is intact.
1.
2.
Step 7 Remove the L-shaped bracket that secures the cabinet and the pallet, and secure
the sliding plate to the pallet by using the two M12 screws that were removed.
Step 8 Raise the four anchor bolts to the highest position using an adjustable wrench.
Issue 08 (2022-11-15)
Visually inspect the SmartLi appearance for shipping damage. If it is
damaged, notify the carrier immediately.
Check that all fittings comply with the packing list. If some fittings are
missing or do not comply with the packing list, record this information and
contact your local Huawei office immediately.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
33