Table of Contents
Advertisement
SmartLi 1.0
User Manual
To avoid leakage, smoke, flammable gas release, thermal runaway, fire, or
explosion, do not disassemble, alter, or damage batteries, for example, insert
sundries into batteries, squeeze batteries, or immerse batteries in water or other
liquids.
There is a risk of fire or explosion if the model of the battery in use or used for
replacement is incorrect. Use a battery of the model recommended by the
manufacturer.
Battery electrolyte is toxic and volatile. Do not get contact with leaked liquids or
inhale gases in the case of battery leakage or abnormal odor. In such cases, stay
away from the battery and contact professionals immediately. Professionals must
wear safety goggles, rubber gloves, gas masks, and protective clothing, power off
the equipment, remove the battery, and contact technical engineers.
A battery is an enclosed system and will not release any gases under normal
operations. If a battery is improperly treated, for example, burnt, punctured,
squeezed, struck by a lightning, overcharged, or subject to other adverse
conditions that may cause battery thermal runaway, the battery may be damaged
or an abnormal chemical reaction may occur inside the battery, resulting in
electrolyte leakage or production of gases such as CO and H
device corrosion, ensure that flammable gas is properly exhausted.
The gas generated by a burning battery may irritate your eyes, skin, and throat.
Take protective measures promptly.
Install batteries in a dry area. Do not install them under areas prone to water
leakage, such as air conditioner vents, ventilation vents, feeder windows of the
equipment room, or water pipes. Ensure that no liquid enters the equipment to
prevent faults or short circuits.
Issue 08 (2022-11-15)
D ANGER
D ANGER
D ANGER
D ANGER
D ANGER
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
. To prevent fire or
2
5
Advertisement
Table of Contents
