Table of Contents
Advertisement
SmartLi 1.0
User Manual
Figure 3-22 Installing battery communications cables
Step 5 Open the battery terminal protective cover and install battery copper bars and
cables.
● Install copper bars between the battery modules, and then install cables
● Connect the round hole of the copper bar to the upper battery module, and
● After the copper bar on each terminal is secured, reinstall the protective cover
● Battery cables are preinstalled inside the cabinet.
● Excessive bolts will be used as spare parts.
Issue 08 (2022-11-15)
NO TICE
between the battery modules and the battery control unit.
then connect the waist hole of the copper bar to the lower battery module.
on the terminal.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
47
Advertisement
Table of Contents
