Network Connections - Canon CXDI-40G COMPACT Service Manual

12.10 Network Connections

Network settings
1) Purpose
These settings are for connecting the CXDI to the network.
1-1) Set the CXDI's IP address, subnet mask and default gateway in Windows XP.
1-2) Set the printer and storage output destinations and parameters on the user screen.
2) Checkpoints
2-1) This item involves checking the details of the checks performed on network setting
parameters among the pre-installation inspection details and setting these parameters.
* Refer to "Appendix: Investigation Report" for the pre-installation investigation
details.
2-2) Perform the settings of this item carefully since any errors made in these settings will
make it impossible for connection to be made to the network or the images to be
transmitted properly, etc.
3) Windows XP settings
3-1) Connect the keyboard and mouse to the control PC.
3-2) After turning on the Operation unit's power and then the Control PC's power, start
Windows XP.
3-3) The Windows XP desktop screen appears. Right-click the [My Network] icon, and
select My Network Places from the menu.
3-4) When [Network Connection] appears, double click on Local Area Connection 3Com
Gigabit Lom (3C904).
3-5) When Local Area Connection Properties appears, click on the General tab, select
[Internet Protocol (TCP/IP)], and click Properties.
3-6) Based on the pre-install of inspection details set the IP address, subnet mask and
default gateway.
3-7) Upon completion of the setting, restart the Windows XP.
2 . I n s t a l l a t i o n
2 . I n s t a l l a t i o n
[ [ F F i i g g 1 1 ] ]
- 63 -
Input settings