Canon CXDI-40G COMPACT Service Manual page 151

7) The Enable OS operation window shown below now appears. Press the [OK] button.
8) The Logoff window shown below now appears. Press the [OK] button.
Once auto logon is set under the [cxdi] user name and ccrstart.bat is set to be executed
automatically, the restrictions placed on the operating system's operations will be released
automatically.
If the setting established will not initiate auto logon, log on under the [cxdi] user name,
and execute ccrstart.bat.
9) As soon as the CCR operation screen appears, press [Tab] while holding down [Alt] on the
keyboard.
10) The selection screen shown below now appears on the screen. Press [Tab] while holding
down [Alt] on the keyboard to select the command prompt screen.
11) The Ccr Console Menu now appears. Press the [Esc] key to display the [***Welcome to
CCR***] screen (see Fig. 1), input [8], and press the [Enter] key.
******* Welcome to CCR *******
1 Set-Up... 5 -
2 Display Set-Up
3 Image Util...
4 -
Enter item:
12) The "Press any key to continue..." message is shown. Press any key to close the CCR
startup software.
13) The Windows XP desktop screen appears.
3. Function
M
C:
F C
6 - Utilities...
7 - Debug...
8 - Exit
(Fig. 1)
- 13 -
Select this.