Canon CXDI-40G COMPACT Service Manual page 131

Procedure/Item
Self-test
Exposure
Output the image
High-resolution DICOM printer
monitor
Check image
quality
2 . I n s t a l l a t i o n
2 . I n s t a l l a t i o n
Operation/Conditions
4. Perform self-test.
Refer to V7.1 New Function Description Manual.
Must pass all the tests.
Perform self-test and note that phototimer and other
parts including grid that are located in the X-ray
entrance surface must be installed.
5. Irradiate X-ray and capture the image of a phantom.
Use the imaging phantom.
6. Output the image to a high-resolution monitor or
DICOM printer.
7. Set the high-resolution monitor and DICOM printer by
referring to their instruction manuals.
8. Check that there is no artifacts, shading, grid stripes,
etc. on the image.
- 111 -