Checking The Sensor Serial No - Canon CXDI-40G COMPACT Service Manual

12.4 Checking the Sensor Serial No.

1) Purpose
If the sensor serial number stored in PWB-Di and the sensor serial number stored on the
hard disk of the control PC fail to match as a result of replacing the PWB-Di board or
sensor unit, it will not be possible to detect the connected sensors when the CXDI
application is launched, and a sensor error message will be displayed. For this reason, check
the numbers and rewrite them if necessary.
2) Notes
2-1) Check the sensor serial No. whenever:
a When the PWB-Di board has been replaced
b When a sensor unit has been replaced
2-2) This checking procedure must be performed with the Control PC, Imaging Unit and
all the other equipments connected and started up.
3) Procedure
3-1) Refer to "6 Sensor serial number setting" in the "Sensor serial number setting," and
check the sensor serial numbers. Rewrite them if necessary.
2 . I n s t a l l a t i o n
2 . I n s t a l l a t i o n
- 55 -