Introduction; Document Information; System Documentation; Stylistic Conventions - Canon Omnera 500A Operator's Manual

1 Introduction

1.1 Document information

• It is important to keep this document for the life of the equipment, and pass the document
on to any subsequent holder or user of the equipment.
• The original version of this manual is written in English.
• Training is provided by or via Arcoma. Training material consists of the Operation manual
and the Installation and service manual.

1.1.1 System documentation

The following documentation is available for the system:
• Installation and service manual
• Operation manual
• Planning guide

1.1.2 Stylistic conventions

All warning label texts are shown in italic style in this manual.
All references are shown in italic style in this manual.

1.1.3 Document producer

This document has been produced by:
Arcoma AB
Annavägen 1
S–352 46 VÄXJÖ,
Sweden
www.arcoma.se
1.1.4 Copyright © 2020 Arcoma Corporation all rights reserved
The reproduction, transmission or use of this document or its content is not permitted without
express written authority. Offered will be liable for damages. All rights, including rights cre-
ated by patent grant or registration of a utility model or design, are reserved.

1.1.5 Text emphasis

WARNING!
All texts labelled with "WARNING" call attention to potential risk to health or life.
CAUTION!
All texts labelled with "CAUTION" contain information about dangerous situations
and measures to avoid risk.
Operator´s Manual
2020-09-14
1000-095-071-EN Rev. 1.1
Page 1
Introduction
Document information
OMNERA®