Air Gap Between Tci Unit And Flywheel Magneto - Yamaha EF3000iSE Service Manual

AIR GAP BETWEEN TCI UNIT AND FLYWHEEL
MAGNETO
AIR GAP BETWEEN TCI UNIT AND FLY-
WHEEL MAGNETO
1. Remove:
• Fuel tank
Refer to "FUEL TANK AND CONTROL
BOX" in CHAPTER 3.
• Air filter element assembly
Refer to "AIR FILTER ASSEMBLY AND
CONTROL UNIT" and "AIR FILTER
ASSEMBLY, CONTROL UNIT AND
NOISE FILTER" in CHAPTER 3.
• Carburetor
Refer to "CARBURETOR" in CHAPTER
3.
• Recoil starter
• Flywheel magneto cover
Refer to "RECOIL STARTER AND FLY-
WHEEL MAGNETO" in CHAPTER 3.
2. Measure:
• Air gap between TCI unit and flywheel
magneto
Use a thickness gauge 1.
Out of specification → Adjust.
Thickness gauge:
SWL2420J 3. Adjust:
• Air gap between TCI unit and flywheel
magneto
Adjustment steps:
• Loosen the bolts 2.
• Adjust the air gap between the TCI unit
and flywheel magneto by moving the TCI
unit up or down.
• Tighten the bolts 2.
Air gap between TCI unit and fly-
wheel magneto:
TCI unit bolt:
2-13
INSP
ADJ
YU-26900-9, 90890-03079
0.5 ± 0.1 mm (0.020 ± 0.004 in)
10 Nm (1.0 m · kg, 7.2 ft · lb)