Air Filter - Yamaha EF3000iS Owner's Manual

5. Remove the carbon deposits on the muffler
screen and the spark arrester using a wire brush.
NOTICE
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
711-075
spark arrester.
6. Check the muffler screen and the spark arrester.
Replace them if damaged.
7. Install the spark arrester.
TIP
Align the spark arrester projection to the hole in the
muffler pipe.
8 Spark arrester projection
9 Hole
8
9
8. Install the muffler screen and the muffler cap, and
then tighten the bolt.
711-076
Muffler cap bolt tightening torque:
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
9. Install the heat-protection cover and the cover,
and then tighten the bolts.
Cover bolt tightening torque:
711-077
7 Nm (0.7 m·kgf, 5.1 ft·lbf)

Air filter

2
1. Remove the bolts and the cover.
1 Bolt
1
2 Cover
788-012
– 35 –