Hide thumbs Also See for EF2800i:
Table of Contents

Advertisement

2
1
1
AE00451

Air filter

3
1. Remove the screws, and then remove the air filter
case cover.
2. Remove the foam element.
1 Screw
2 Air filter case cover
3 Foam element
3. Wash the foam element in solvent and dry it.
Never use solvent while smoking or in the vicinity
of an open flame.
4. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
NOTICE
710-037a
Do not wring out the foam element when squeez-
ing it. This could cause it to tear.
Recommended oil:
5. Insert the foam element into the air filter case.
NOTICE
The engine should never run without the foam ele-
ment; excessive piston and cylinder wear may
result.
TIP
Be sure the foam element sealing surface matches
the air filter so there is no air leak.
6. Install the air filter case cover and tighten the
screws.
WARNING
Foam-air-filter oil or engine oil (See page 29)
– 31 –

Advertisement

Table of Contents
loading

Table of Contents