Flywheel Magneto Installation - Yamaha EF3000iSE Service Manual

RECOIL STARTER AND FLYWHEEL MAGNETO
1
2
1

FLYWHEEL MAGNETO INSTALLATION

1. Install:
• Woodruff key 1
• Flywheel magneto 2
CAUTION:
Be sure to remove any oil or grease from
the tapered portion of the crankshaft using
a cloth dampened with thinner.
SWL3150J
NOTE:
Insert the woodruff key 1 into the groove in
the flywheel magneto 2.
2. Install:
• Starter pulley
• Washer
• Flywheel magneto nut 1
2
NOTE:
SWL3470J
Tighten the flywheel magneto nut 1 using the
sheave holder 2 to hold the flywheel mag-
neto.
3. Measure:
• Air gap between TCI unit and flywheel
magneto
Refer to "AIR GAP BETWEEN TCI
UNIT AND FLYWHEEL MAGNETO" in
CHAPTER 2.
3-13
ENG
Flywheel magneto nut:
65 Nm (6.5 m · kg, 47 ft · lb)
Sheave holder:
YS-01880-A, 90890-01701
Rotor assembly holder:
(commercially available)
Air gap between TCI unit and fly-
wheel magneto:
0.5 ± 0.1 mm (0.020 ± 0.004 in)