Du Pont SORVALL RC-5 Service Manual page 125

WARNING
Because of the characteristics of
the samples likely to be processed
in this centrifuge, biological or
radioactive contamination may
occur. Always be aware of this
possibility, and take normal
precautions. The Kendro Service
Decontamination Policy states that
a completed Decontamination
Information Certificate is required
before servicing.
Warning:
Because of the presence of high
voltage, untrained personnel
must not attempt to test, repair, or
modify any electrical circuits or
systems in this unit.
P/N: 50589-3
INSTRUCTIONS
RC-5B / RC-5C Preventative Maintenance Kit
(Kit Catalog No. 12010)
Parts Supplied:
Quan Part Number
1
1
1
1
2
4
4
8
4
1 pkg
4
Instructions
RC-5B / 5C Preventative Maintenance:
This section contains procedures for the routine, preventive, and corrective
maintenance of the Sorvall RC-5B and RC-5C Centrifuges. The routine
and preventive maintenance procedures are performed on a scheduled
basis to ensure that the centrifuge functions properly. The preventative
maintenance kit part number 12010 will supply all of the parts needed to
perform this preventative maintenance procedure.
Routine Maintenance:
1. Inspect the centrifuge and rotors weekly for the following:
a. Signs of wear, pitting and corrosion (due to caustic samples or
cleaning agents).
b. Encrusted biological deposits.
c. Accumulation of dust (condenser).
d. Ice build up in the rotor chamber.
2. Clean, replace, or repair as required.
for the
12284 Motor Brush Kit 1/4"
74196 Motor Brush Kit 3/8"
50414 Gyro Cover Seal
50415 Gyro Insulating Disk
204742 Tapered Pin
68158 Male Standoff, 10-32
60012 Hex Nut, 10-32, SST
61652 Flat Washer, SST, #10
60568 Screw, Motor, #10-32
83187 Incadensent Lamp (package of 10)
60346 NUT,HEX 10-32 SST
Description
Page 1