Rational iCombi Pro Original Installation Instructions page 86

Table of Contents

Advertisement

12 | Initial start-up
Inserting GN container
1. Slide a flat GN container with the opening facing down into the hang lad-
ders in front of each fan wheel.
>>
For device sizes XS GN to 6 full size GN, there is a GN container in the
middle of the hook ladder in front of the fan wheel.
>>
For device sizes 10 half size GN and 10 full size GN, there are two GN con-
tainers in the hook ladders, one in the middle of each fan wheel.
>>
For device sizes 20 half size GN and 20 full size GN, there are three GN
containers in the mobile oven rack, one in the middle of each fan wheel.
Start self test
1. Close the cooking cabinet door.
2. Start the self test.
>>
During the self test, the device is also checked for leaks. If steam escapes
from the closed cooking cabinet door during the self test, wait until the
self test is complete and check the door setting.
>>
The display shows when the self test has been completed.
If steam escapes from the door during the self test, the door setting may
not be correct. In this case, check the door setting and reset the door if
necessary.
86 / 96
NOTE
80.06.083_iCombiPro-iCombiClassic_IM_en-US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icombi classicCombimaster plus

Table of Contents