Heat shield (optional)
If a sufficient distance to the heat source on the left cannot be maintained, an
additional heat shield is available to reduce the thermal load.
For the device sizes 6 half size GN and 10 half size GN, an additional heat shield
is available for the right side.
Please note: The heat shield for the device sizes 6 half size GN to 20 full size GN
is not suitable for Combi-Duo and UltraVent.
5.1.3 Distance to ceiling
Electric devices
Install the electrical device with a minimum distance between the ventilation
pipe of the device and the grease filters of the extraction hood/ventilation ceil-
ing.
x [mm]
x [inch]
80.06.083_iCombiPro-iCombiClassic_IM_en-US
Minimum distance from ceiling
254
10
5 | Setup
29 / 96