3. Loosen two screws in the recess of the rear side wall of the device.
4. Pull the left side wall downwards away from the device.
5. Remove the side wall.
>>
The electrical compartment is open.
Device size 20 half size GN, 20 full size GN
1. Loosen two screws on the underside of the side panel in recess of frame.
>
The openings to the screws are closed with a cover. Remove the cover care-
fully to access the screws.
2. Lift the left side wall from below and pull the side wall downwards away
from the device.
80.06.083_iCombiPro-iCombiClassic_IM_en-US
6 | Electrical connection
49 / 96