2. Check that the mobile oven rack enters the device straight. If this is not the
case, use an entry ramp or drive-over aids.
Entry ramp and drive-over aid
If the ground is not level, the unevenness must be compensated by an entry
n
ramp.
If there is a drain grille in front of the floor device, install a drive-over aid in
n
the entry area of the mobile oven rack.
Storage of the handle
The included holder provides safe storage of the handle for the mobile oven
rack during cooking.
1. Attach the handle holder to the top of the device so that the holder faces the
left side panel.
2. Hang the handle in the holder.
80.06.083_iCombiPro-iCombiClassic_IM_en-US
5 | Setup
41 / 96