5 | Setup
5.4
Fixing the device in place
Slipping of the device at the installation position
Risk of crushing due to shifting or slipping of the devices.
Connections and lines may be damaged in certain devices.
Secure the device using the fixing set.
n
Also secure the device with a suitable retaining device against slipping
n
on the rear wall (retaining device is not included in the scope of delivery).
Fixing
Secure devices against slipping with optional expansions (e.g. Marine, Combi-
Duo). The fixing set must be expanded with suitable retaining devices.
If present, use the supplied retaining devices (e.g. bracket for wall fixing).
5.5
Notes on the extractor hood
Harmful exhaust flue gases
Risk of suffocation or poisoning due to concentrations of harmful flue gases
(Carbon monoxide).
Make sure that there are sufficient ventilation options in the installation
n
area.
Carry out a flue gas analysis during commissioning of the device.
n
Only for Japan:
n
The device must be installed under an exhaust hood.
42 / 96
CAUTION
DANGER
80.06.083_iCombiPro-iCombiClassic_IM_en-US