Replacement Of Control Module (Bms) - Pylontech PowerCube-M1-C Operation Manual

5.2.1.5 Handle the battery module out of the rack, and put it to the appoint place.
Warning: Single battery module is 43kg. If without handling tools must more than 3
personnel to handling with it. If install in high place of the rack it must more than 4
personnel.
Un module de batterie pèse
hommes pour manipuler avec lui. Si vous l'installez en hauteur, il faut plus de
5.2.1.6 Install the new battery module (see before 5.2.1.1). And connect the normal cables. Refer
to chapter 3.5.
5.2.1.7 Turn on this battery string. Refer to chapter 3.6.
5.2.1.8 Make a fully charge of the system before normal operation.

5.2.2 Replacement of Control Module (BMS)

5.2.1.1 Shut off the whole battery string's power. Must confirm the D+ and D- terminal are without
power. The turn off progress refer to chapter 3.6.5.
5.2.2.2 Pull out the plugs of Power Cables and the communication plugs.
kg. Sans outils de manipulation, il est nécessaire de plus de
55
53
3
4