Raven RS1 Installation Manual page 21

Hide thumbs Also See for RS1:

Table of Contents

CHAPTER 3

9. The cab interior should appear similar to the picture below.

FIGURE 8. B-Pillar and Corner Trim Panels Removed

NOTE:

If the machine is equipped with either a screen bar or cup holder, these pieces will need to be

removed as well before removing the B-pillar.

10. Remove the air vent on the upper, right side of the cab.

FIGURE 9. Air Vent Removed

RS1™ Installation Manual for Claas OSI Harvesters

Table of Contents