Signals; Settings; Operation Principle - Hitachi Relion 650 Series Technical Manual

1MRK 511 557-UEN Rev. A
12.21.4

Signals

Table 290: GFGDE Input signals
Name
INPINT
INPREAL
INPBIN
INPPOS
BASIN
Table 291: GFGDE Output signals
Name
OUTINT
OUTINTRL
OUTRL
OUTRLINT
OUTBL
OUTBLPOS
OUTPOS
INVLINT
BASOUT
12.21.5

Settings

Table 292: GFGDE Non group settings (basic)
Name Values (Range)
Operation
12.21.6

Operation principle

Output
OUTINT
OUTINTRL
OUTRL
OUTRLINT
Table continues on next page
Technical Manual
Type
INTEGER
REAL
BOOLEAN
INTEGER
BOOLEAN
Type
INTEGER
REAL
REAL
INTEGER
BOOLEAN
INTEGER
INTEGER
BOOLEAN
BOOLEAN
Unit
Off -
On
Derived from input
INPINT
INPREAL
© 2021 Hitachi Energy. All rights reserved.
Default Description
0 Integer input
0.0 Real input
0 Binary input
0 Switch position input
0 Input for loop connection with BAS_OUT
Description
Integer output value derived from INPINT to map to measurand in
GDE
Real output value derived from INPINT
Real output value derived from INPREAL to map to measurand in
GDE
Integer output value derived from INPREAL
Boolean output value derived from INPBIN
Position output value derived from INPBIN to map to breaker
indication in GDE
Position output derrived from INPPOS to map to breaker
indication in GDE
Invalid OUTRLINT input value
Output for loop connection with BAS_IN
Step Default
- Off
GDE symbols supported
Measurand
None
Measurand
None
PID-2731-INPUTSIGNALS v1
PID-2731-OUTPUTSIGNALS v1
Description
Operation Mode Off / On
GUID-028D4952-DD2E-4C09-85DB-C06FDAF64F53 v1
Application
Shows the integer values,
for example, operation
count in LHMI.
None
Shows the real values, for
example, breaker
operation time, control
voltage, and temperature
in LHMI.
None
Section 12
Monitoring
PID-2731-SETTINGS v1
329