Table of Contents
Advertisement
5.2.4. Installation of an extended nozzle (optional)
The Inogun A gun can be equipped with optional extended nozzles for flat spray and round spray
(see § 8.10.2 page 57
and
• Switch off high voltage,
• Step 1: Manually unscrew the nozzle nut (1).
• Step 2: Remove the electrode support assembly (3)
and its deflector (2) flat spray or round spray.
When installing an extended nozzle from length 450
mm, it is imperative to check the installation of the
reinforcing sleeve (4) (ref.: 900020899) on the
reinforced electrode support
• Step 3: Install the extended nozzle assembly (5) into
the projector barrel.
• Step 4: Screw on the new extended nozzle nut (6) by
hand.
• Step 5: Install the
deflector
• Restart the high voltage supply.
see § 8.10.4 page
67).
(see § 8.10.3 page
(7).
1
66).
7
29
D - 2023/01
2
3
4
6
5
Member of Exel group
DRT7133
Advertisement
Table of Contents
