Robotic Versions - Sames inocoat Inogun A Instruction Manual

5.2.6. Robotic versions

• Pass the low-voltage cable as well as the air and
powder hoses through the sheath, then the coupling
and the robotic support.
• Place the O-ring and sleeve on the LV cable. Manually
connect the LV cable and then the air and powder
hoses to the projector.
• Place the robotic support on the projector and secure
with the 3 screws (F/90 HC M4 x 20).
• Screw the coupling onto the robotic support.
• Push the sheath into the fitting.
31
DRT7133
D - 2023/01
Member of Exel group