Table of Contents
Advertisement
6.2. Preventive maintenance plan - PMP 7133
see § 10.1 page 78
The objective of the proposed preventive maintenance plan is to define in an exhaustive way, the verification,
replacement and cleaning actions of the installed Sames equipment.
In order to anticipate breakdowns and malfunctions that may be due to technical deviations of the installation, the
preventive maintenance plan attached to the user manual lists the routine maintenance operations necessary for
better comfort in the use of the production tool.
Depending on the skills, area of responsibility and accreditation of each person involved, the preventive maintenance
plan can be divided into two distinct levels: level 1 and level 2:
• Level 1: first level maintenance is essentially composed of visual control and cleaning operations of some
elements of the equipment. To limit this level, only the specific tools supplied with the equipment will be used.
This first level of maintenance is generally taken care of by paint operators or installation managers.
• Level 2: second level maintenance completes the first level by more complex dismantling operations requiring
electrical engineering tools.
This second level is generally handled by the factory maintenance department.
6.3. Cleaning
These maintenance operations can be performed online. Before any intervention, refer to the health and
safety instructions
(see § 1.4 page
6.3.1. Procedure A1: Projector cleaning
Always wear safety glasses.
When handling powder, wear gloves of a suitable resistant material
Work in a well ventilated area.
All cleaning operations should only be carried out with compressed air expanded to a
maximum pressure of 2.5 bar, a cloth or possibly a brush.
Never use water or solvents to clean the equipment.
• Clean the projector with compressed air every 8 hours..
10).
33
DRT7133
D - 2023/01
Member of Exel group
Advertisement
Table of Contents
