Table of Contents
Advertisement
5.2. Installation
The Inogun M guns are installed either on the different types of cart (vibrating table, tank or
penetrant testing) or on a manual station of a booth (see corresponding operating manuals).
5.2.1. Installation of an extended nozzle (option)
The Inogun M guns can be equipped with optional extended nozzles for flat spray and round spray
47
and
see § 8.4.4 page
52).
• Switch off high voltage,
• Step 1: Manually unscrew the nozzle nut (1),
• Step 2: Remove the electrode support assembly (3)
and its flat jet or round jet deflector (2).
When installing an extended nozzle from length 450
mm, it is imperative to check the presence of the
reinforcing sleeve (4) (P/N 900020899) in the
reinforcing electrode support
• Step 3: Install the extended nozzle assembly (5) into
the gun barrel.
• Step 4: Manually screw the new extended nozzle nut
(6).
• Step 5: Install the deflector (7).
• Switch on high voltage.
(see § 8.4.4 page
52).
21
1
2
3
5
6
7
DRT7132
D - 2022 /09
(see § 8.4.2 page
4
Member of Exel group
Advertisement
Table of Contents
