Maintenance - Siemens SITRANS F Operating Instructions Manual

Functions

8.11 Maintenance

Alarm simulation
In PDM it is possible to simulate either specific alarms (ID numbers) or alarm classes; in LUI
only alarm classes can be simulated. The alarm classes are either Siemens or NAMUR
depending on the configuration of Alarm Mode, menu item 3.2.1.
All alarms mentioned in "Alarm messages" (Page 141) can be simulated.
8.11 Maintenance
● Set Date and Time
● Set To Default
● Restart Device
138
The device has a built-in real-time clock used for time stamps of various events (for
example alarms and configuration changes). The date and time can be set in menu item
3.3.2.
The device can be reset to its default settings in menu item 3.3.3.
The device can be restarted without disconnecting the power in menu item 3.3.4.
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01