Display View Structure - Siemens SITRANS F Operating Instructions Manual

Operating
7.1 Local User Interface (LUI)
Note
LUI timeout
If no key is pressed for 10 minutes, the display switches to show operation view.
Note
Operation does not require opening of the device. This means that the high degree of
protection of IP67 and safety in hazardous locations are guaranteed at all times.
Note
Motor fuel dispensers
The Local User Interface is not suitable as an indication device for motor fuel dispensers.
7.1.1

Display view structure

There are three view types:
● Operation view
● Navigation view
● Parameter view
Navigating the operation view
Browse the operation views and menu items using the control buttons as follows:
Table 7- 1
Key
92
The operator view shows up to six operation views (Page 96). The operation views are
fully configurable to show different process values in different operation view types.
Depending on the operation view type configuration the view is either measurement view
or alarm view.
– Measurement view: Displays the measurement values.
– Alarm view: Displays the active alarms in a list.
The navigation view (Page 102) shows the menus and parameters. The navigation view
is used to navigate to the menus and parameters in the device.
The parameter view (Page 107) can be entered form the navigation view. The parameter
view is used to view and edit the parameters.
Measurement view
Function
No functionality
Go to the previous menu in the operation view
Go to the next menu in the operation view
Enter the navigation view
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01