Checking The Consignment; Device Identification - Siemens SITRANS F Operating Instructions Manual

Inspection
1. Check for visual mechanical damage due to possible improper handling during shipment.
2. Make sure the scope of delivery, and the information on the type plate corresponds to
1.3

Checking the consignment

1. Check the packaging and the device for visible damage caused by inappropriate handling
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing the shipping documents with your order for
1.4

Device identification

Each part of the FC430 Coriolis flowmeter has three nameplate types showing the following
information:
● product identification
● product specifications
● certificates and approvals
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
All claims for damage are to be made promptly to the carrier.
your order and the delivery note.
during shipping.
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
 Do not use any damaged or incomplete devices.
Note
Identification
Identify your device by comparing your ordering data with the information on the product
and specification labels.
Introduction
1.3 Checking the consignment
11