Siemens SITRANS F Operating Instructions Manual page 110

Operating
7.1 Local User Interface (LUI)
Changing a value:
1. Select the digit to be changed by pressing
2. Use
3. Press
Note
Ensure that the new value is within the minimum/maximum range.
Changing the resolution:
1. Select decimal point by pressing
2. Move decimal point by pressing
In order to change the resolution of the process value shown in the operation view (for
example massflow), change the resolution of one configuration parameter for this process
value (for example "Low Flow Cut-off" (menu item 2.2.1.2)). Any changes in resolution will
change the resolution of all configuration parameters for this process value as well.
Numeric parameter read only view
Numeric parameters in read only view are displayed as shown here.
2
1
①
②
③
④
⑤
Figure 7-10
The read only view is shown if you don't have access to edit parameters. The view shows
the set value. Press
108
key to increase the value and
key in the rightmost position to confirm the changes, or press
leftmost position to escape the view without changing the value.
decimal point to the right).
3
Escape
The set value
Parameter name
Parameter item number
Help text describing the parameter function.
Numeric parameter read only view
to escape the view.
and
key and decrease the values.
and keys.
key (moves decimal point to the left) or
4
5
Operating Instructions, 03/2012, A5E03361511-01
keys.
key in the
SITRANS FC430 with HART
key (moves